NETGEAR UTM25-100NAS Router User Manual


 
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
4-26 LAN Configuration
v1.0, September 2009
Table 4-5. RIP Configuration Settings
Setting Description (or Subfield and Description)
RIP
RIP Direction From the RIP Direction pull-down menu, select the direction in which the UTM
sends and receives RIP packets:
None. The neither advertises its route table nor does it accept any RIP
packets from other routers. This effectively disables RIP.
In Only. The accepts RIP information from other routers but does not
advertises its routing table.
Out Only. The advertises its routing table but does not accept RIP
information from other routers.
Both. The advertises its routing table and also processes RIP information
received from other routers.
RIP Version From the RIP Version pull-down menu, select the version:
RIP-1. Classful routing that does not include subnet information. This is the
most commonly supported version.
RIP-2. Routing that supports subnet information. Both RIP-2B and RIP-2M
send the routing data in RIP-2 format:
RIP-2B. Sends the routing data in RIP-2 format and uses subnet
broadcasting.
RIP-2M. Sends the routing data in RIP-2 format and uses multicasting.
Authentication for RIP-2B/2M
Authentication for
RIP-2B/2M required?
Authentication for RP-2B or RIP-2M is disabled by default, that is, the No radio
button is selected. To enable authentication for RP-2B or RIP-2M, select the
Yes radio button and enter the settings for the fields below.
First Key Parameters
MD5 Key Id The identifier for the key that is used for authentication.
MD5 Auth Key The password that is used for MD5 authentication.
Not Valid Before The beginning of the lifetime of the MD5 key. Enter the
month, date, year, hour, minute, and second. Before this
date and time, the MD5 key is not valid.
Not Valid After The end of the lifetime of the MD5 key. Enter the month,
date, year, hour, minute, and second. After this date and
time, the MD5 key is no longer valid.
Second Key Parameters
MD5 Key Id The identifier for the key that is used for authentication.
MD5 Auth Key The password that is used for MD5 authentication.