Filter
Top Products
from the LAN and then connect the PC with an Ethernet straight cable using 192.168.0.101 for the IP
address of the IPCMPR card.
*1
Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2
Valid IP address range: "1.0.0.0" to "223.255.255.255
"
*3
Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and 255.255.255.255)
*4
Valid IP address range: "0.0.0.0" to "223.255.255.255"
PBX Web Manager
It is possible to use a PC with the Maintenance Console (PBX Unified PC Maintenance Console) installed, as
a web server. This allows users to configure the PBX via a web browser on a local client, or a remote PC
through the Internet.
PBX Server
Client
Remote PC
IP Network
If Maintenance Console is installed on the client PC, a web server is not necessary.
PBX
Server/Client
Accessing PBX Web Manager
PBX
Web
Manager can be enabled during the installation of the Maintenance Console. It can also be enabled
in Options.
Note
• When starting
the Maintenance Console, if there is less than 80 MB of available memory, this feature
is automatically disabled.
• Only one user can access Maintenance Console or PBX Web Manager at any given time.
To start PBX Web Manager:
1. If the PC is not the web server:
Launch a web browsing application and enter the
following URL:
"http://xxx:8181/INDEX.ASPX"
’xxx’ should be replaced with the server’s IP address.
If the PC is the web server:
Double-click the PBX Web Manager icon in the system
tray(
).
20 PC Programming Manual
1.2.1 Installing and Starting the Maintenance Console