– CO Pulse Speed
• 3.42 [1-1] Slot—Port Property - E1 Port
– CO Dial Mode
– DTMF Width
– CO Pulse Speed
Feature Guide References
1.5.4.4 Dial Type Selection
Direct In Line (DIL)
• 12.2 [10-2] DIL Table & Port Settings—DIL
– DIL Destination—Day, Lunch, Break, Night
– Tenant Number
– VM Trunk Group No.
Feature Guide References
1.1.1.2 Direct In Line (DIL)
Direct Inward Dialling (DID)/Direct Dialling In (DDI)
• 4.5 [2-3] Timers & Counters—Miscellaneous
— Incoming Call Inter-digit Timer—DDI / DID
• 12.2 [10-2] DIL Table & Port Settings—DDI / DID / TIE / MSN
– Distribution Method
– DDI/DID/TIE/MSN—Remove Digit
– DDI/DID/TIE/MSN—Additional Dial
• 12.3 [10-3] DDI / DID Table
Feature Guide References
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
Direct Inward System Access (DISA)
• 4.5 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf
– DISA—Delayed Answer Timer
– DISA—Mute & OGM Start Timer after answering
– DISA—No Dial Intercept Timer
– DISA—2nd Dial Timer for AA
– DISA—Intercept Timer—Day, Lunch, Break, Night
– DISA—Disconnect Timer after Intercept
– DISA—CO-to-CO Call Prolong Counter
– DISA—CO-to-CO Call Prolong Time
– DISA—Progress Tone Continuation Time before Recording Message
– DISA—Reorder Tone Duration
• 4.5 [2-3] Timers & Counters—Miscellaneous— Extension PIN—Lock Counter
• 4.12 [2-7-1] Class of Service—COS Settings—Optional Device & Other Extensions— Accept the Call
from DISA
• 5.1 [3-1-1] Trunk Group—TRG Settings—Tone Detection
–
DISA Tone Detection—Silence
– DISA Tone Detection—Continuous
– DISA Tone Detection—Cyclic
• 6.1 [4-1-1] Wired Extension—Extension Settings—Intercept Destination— Intercept Destination—When
called party does not answer—Day, Lunch, Break, Night
PC Programming Manual 903
Feature Programming References