Filter
Top Products
10.4 [8-3] Routing Plan Time—Time Setting
The start
times of a maximum of 4 different time blocks can be programmed for each day of the week, for the
selected Routing Plan. Each time block automatically ends when the subsequent block begins.
Time-A–D—Setting
Enables the setting of the start time for each time block.
Value Range
Disable, Enable
Maintenance Console Location
10.4 [8-3] Routing Plan Time—Time Setting
Programming Manual References
None
Feature Guide References
1.10.1 Automatic Route Selection (ARS)
Time-A–D—Hour, Minute
Specifies the start time for each time block.
Value Range
00:00–23:59
Maintenance Console Location
10.4 [8-3] Routing Plan Time—Time Setting
Programming Manual References
None
Feature Guide References
1.10.1 Automatic Route Selection (ARS)
802 PC Programming Manual
10.4 [8-3] Routing Plan Time—Time Setting