Filter
Top Products
4.17 [2-8-3] Ring Tone Patterns—Call from Others
Different ring tone patterns can be selected for incoming intercom calls and ringing triggered by certain PBX
features (Timed Reminder, Call Back, and Live Call Screening). A maximum of 8 Ring Tone Pattern Tables
can be programmed, and any pattern table can be selected for use by an extension.
For more information on ring tone patterns, see
"1.1.3.2 Ring Tone Pattern Selection
" in the Feature Guide.
Extension—Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for incoming intercom calls.
Value Range
Single, Double
, Triple, Option 1, Option 2
Maintenance Console Location
4.17 [2-8-3] Ring Tone Patterns—Call from Others
Programming Manual References
6.1 [4-1-1] Wired Extension—Extension Settings
—Option 1—
Ring Pattern Table
6.10 [4-2-1] Portable Station—Extension Settings—Option 1— Ring Pattern Table
Feature Guide References
None
Timed Reminder—Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for Timed Reminder alarms.
Value Range
Single, Double, Triple, Option 1, Option 2
Maintenance Console Location
4.17 [2-8-3] Ring Tone Patterns—Call from Others
Programming Manual References
6.1 [4-1-1] Wired Extension—Extension Settings
—Option 1—
Ring Pattern Table
6.10 [4-2-1] Portable Station—Extension Settings—Option 1— Ring Pattern Table
Feature Guide References
None
Call Back—Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for callback ringing by Automatic Callback Busy.
482 PC Programming Manual
4.17 [2-8-3] Ring Tone Patterns—Call from Others