Filter
Top Products
Feature Guide References
1.10.1 Automatic Route Selection (ARS)
Authorisation Code for Tenant
Specifies an Authorisation code for each tenant. The Authorisation codes can be added to the user-dialled
number by specifying
"A" command in
Modify Command on the Carrier tab.
Authorisation Code for Tenant—Tenant 1–Tenant 8
Specifies the Authorisation code of each carrier for each tenant.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Maintenance Console Location
10.6 [8-5] Carrier
Programming Manual References
None
Feature Guide References
1.10.1 Automatic Route Selection (ARS)
2.2.3 Tenant Service
806 PC Programming Manual
10.6 [8-5] Carrier