Filter
Top Products
32
4 Basic Operation
Pausing Cutting Operations
Pressing the [ENTER] key displays a screen like the one shown below and pauses cutting.
- To resume cutting without change
Press the [PAUSE] key again.
PAUSE | <CONT.>
8
Click [Selected Tool] displays the numerals [1]
through [4] and the [Machine Setting] selections.
To perform cutting using the conditions set with the
CX-24/12, choose [Machine Setting].
9
To specify the speed for performing cutting using the
driver, choose a number from [1] to [4]. Double-click
the selected tool number, then enter the value for
[Tool Speed].
When you do this, the machine settings for the CX-
24/12 are disabled.
Click [OK].
If you're using Windows 2000/XP, the [Properties]
dialog box appears. Click [OK].
If you're using Windows NT, the [Printers] dialog box
appears.
10
Click [OK].
In the program window, lay out the cutting data so
that it fits within the displayed cutting range.
11
Send the cutting data from the program to the CX-24/
12.
* When you are performing cutting, choose [Off] for [Fill Pitch].