Filter
Top Products
8 Cutting Printed Material
43
How to lay out figures for cutting
Creating Data and Printing the Material
1
From [File] menu, click [Document Setup].
The [Document Setup] dialog box appears.
2
For [Units], choose [Millimeters].
Cutting around a
figure
Cutting inside a
figure
4
Click [Print Setup].
The [Print Setup] dialog box appears.
5
Choose the driver name for the output printer.
Click [Properties].
The [Properties] dialog box appears.
6
For the material size, choose [A4] and [Portrait], then
click [OK].
The [Print Setup] dialog box appears.
3
Select the [Use Print Setup] check box, and for
[Orientation], click
.
8-4 Performing Operations Using Crop Marks
This section describes how to perform output. The operating environment described below is used in the examples.
Data-creation program: Adobe Illustrator 8.0 for Windows
For detailed information on how to use Illustrator, refer to the user's manual or program help for Illustrator.
The explanations here assume that you are already familiar with the basic operation of Illustrator.
Material Size : A4