Filter
Top Products
57
10 Display Menu Descriptions
WIDTH | <170mm>
Stored in Memory
Factory Default
Setting Range
Description
WIDTH
Steps
LENGTH | <210mm>
Stored in Memory
Factory Default
Setting Range
Description
LENGTH
Steps
SETUP
SETUP | <ON>
Stored in Memory
Selection Choices
Description
No
ON, OFF
When this is on, cutting data can be received and various menu settings can
be made.
Yes
170 mm
50 to 610 mm
1 mm
This sets the distance between the right crop mark
and the left one shown in the figure at right.
Specify the same value as the distance between
two crop marks specified by the program.
Yes
210 mm
50 to 500 mm
1 mm
This sets the distance between the upper
crop mark and the lower left one shown in
the figure at right.
Specify the same value as the distance
between two crop marks specified by the
program.