Filter
Top Products
8 Cutting Printed Material
45
SELECT | ROLL
Loading Output Material on the CX-24/12
1
Position the pinch rollers outside the crop marks.
2
Orient the material so that its long edges are parallel
to the material-feed direction of the CX-24/12.
Position the crop marks above the blade protector.
3
Raise the sheet loading lever to secure the material in
place.
4
Switch on the power.
5
At the screen shown at right, press the [MENU/
PARAM] key to move the cursor.
Right Pinch Roller
Blade Protector
Left Pinch Roller
SETUP -> ENTER
SELECT | ROLL
CX-24 CX-12
SETUP -> ENTER