Filter
Top Products
63
11 Display Menu Flowchart
11 Display Menu Flowchart
To display the setting values for the various menu items,
press the [MENU/PARAM] key. For detailed information on
how to make menu settings, see "4-3 Turning on the Power -
Making Menu Settings with the Control Panel."
Turned clockwise
Turned counterclockwise
SELECT | ROLL
SMOOTH.| <ON>
WEIGHT| <LIGHT>
CALL | <USER1>
RESTORE| <USER1>
I/O | <AUTO>
SETUP -> ENTER
Roland DG Corp.
#BAUD.| <9600>
#DATA.| <8>
#STOP.| <1>
#PARITY| <NONE>
#HANDS.|<H-WIRE>
WIDTH | *****mm
NOW LOADING..
SETUP | <ON>
FORCE | < 80g>
SPEED | <40cm/s>
OFFSET| <0.250>
AREA | < 1.0m>
REPLOT| START
ROTATE| <OFF>
LANG. |<ENGLIS> DEMO CUT
UNIT |<Metric>
EXIT
ROLL, EDGE, PIECE
Metric, Inch
The display changes
when settings are finished.
[ENTER]
[ENTER] returns the settings to
their factory defaults.
[MENU/PARAM] +POWER ON
ON, OFF
ON, OFF
4800, 9600
8, 7
1, 2
NONE, ODD, EVEN
H-WIRE, XONOFF
LIGHT, HEAVY
USER1 to USER8
USER1 to USER8
AUTO, PALA, SERIAL
ON, OFF
30 to 200 g (In steps of 10 g )
1 to 40 cm/s
(1 cm/s when in the range of 1 to 10 cm/s
5 cm/s when in the range of 10 to 40 cm/s)
0 mm (PEN), 0.175 mm,
0.250 mm, 0.500 mm
-24.9 to 24.9 m (In steps of 0.1 m)
START, CLEAR
[ ] +POWER ON
INITIALIZE EEROM
ENTER->START INT
[ENTER] +POWER ON
When connected with a serial cable,
choose [SERIAL] or [AUTO] and press
[ENTER].
[ENTER]
[ENTER]
, Englis, Deut.
ITAL.,
PORTUG
EXIT
[ENTER]