Filter
Top Products
33
4 Basic Operation
1
2
3
4
5
1
2
Pressing the [ENTER] key displays the message
shown at right, and cutting stops.
When Continuing with Cutting on the Same Piece of Material
Set the origin point at an uncut location on the
material (the location where you want to cut next).
For information on how to set the origin point, see "4-
6 Setting the Origin Point."
- To stop cutting
Halt transmission of cutting instructions from the computer.
Turn the dial on the CX-24/12 to choose [END].
Send the cutting data from the program to the CX-24/
12.
PAUSE | <STOP>
SUSPENDED
Double-click the printer icon.
For the CX-24:
[Roland CAMM-1 CX-24]
For the CX-12:
[Roland CAMM-1 CX-12]
Click [Start].
Point to [Settings] and click [Printers].
If you’re using Windows XP, click [Start]-[Control
Panel] and then click [Printers and Other Hardwares]-
[Printers and Faxes].
From the [Printers] menu, click [Purge Print Jobs] or
[Purge Print Documents].
Make sure the displayed data for the file being printed
disappears.
If you're using Windows 2000/XP, choose [Cancel All
Documents].