Filter
Top Products
4–2 Start–Up and Operation MN735
Display
Displays the units for the value:
S for time in seconds, A for current in Amps
V for voltage in Volts, % for percentage
Hz for frequency in Hertz
when in the Parameter menu
when in the Setup menu
when displaying an Alarm code
a negative parameter value
Local mode.
(Remote mode when
hand is not visible.
Represents a rotating motor shaft:
CW = forward rotation
CCW = reverse rotation.
Parameter numbers or values, trip information,
error codes etc. See Drive Status Indications.
Not Used
Drive Status Indications (shown on keypad)
Display Status Indication and Meaning Possible Cause
READY/HEALTHY No alarms present.
Remote mode selected
PASSWORD Current password must
be entered before this parameter may
be altered.
Enter password to change the parameter.
(See password protection).
LOCAL Local mode selected Added or removed from the display
letter–by–letter to indicate entering or
leaving Local mode
Diagnostics Menu
Display Name Description
FREQUENCY The current output frequency in Hertz
SPEED SPT The set point as a percentage of MAX SPEED
DC LINK VOLTS VAC √2 = dc link Volts
MTR CURRENT The current load value in Amps