Filter
Top Products
Start–Up and Operation 4–5MN735
Hold this key down until
the display shows
Hold this key down until
the display spells
REMOTE
LOCAL
Password Protection
When activated, the password prevents unauthorized parameter
modification by making all parameters “read–only”. Password protection is
set–up using the
parameter.
Steps ACTIVATE TEMPORARY DE-ACTIVATION REMOVE PASSWORD
Actions Display Actions Display Actions Display
1 Try to edit any
parameter with
password activated
2
3 Original
parameter
displayed,
password
de-activated
4 A drive will power-up with the last
password status. Temporary
de activation is lost on
Default = 0000, de-activated
Any other value is a password
de-activation is lost on
power-down.
Quick Application Selection
Press and hold theStop key.
Power up the control.
Continue to hold the key for at least 1 second.
You can navigate immediately to the APPLICATION
parameter,
P
1, from this power–up condition.
Then, press the
key to display the current Application.
Use the
keys to select the appropriate Application by number.
Press the
key to load the Application.