Filter
Top Products
CE Guidelines B–5
MN735
Baldor UK Limited
Mint Motion Centre
Hawkley Drive.
Bristol Distribution Centre,
Bristol, BS32 0BF
United Kingdom
Tel: (+44) 01454 850000
Date: 1/5/02 EC Declarations of Conformity Ref: DE00013–000
This is to certify that Baldors Inverter products comply with the requirements of CE Directive as
described below and being one of:–
35D Family 37D Family 38D Family
When used in accordance with the guidance and instructions given in the corresponding Product
Installation Manual, the above Electronic Products conform with the protection requirements of
Council Directive 89/336/EEC and amended by 92/31/EEC and 93/68/EEC, Article 10 and Annex
1, relating to the EMC Directive and Manufacturers Declaration for EMC, by the application of the
relevant clauses of the following standards:
Standard
EMC Directive
Manufacturers Declara-
tion
BSEN 500081–1: 1992 &/or
BSEN50081–2
nn
(1994): 1996 nn
BSEN 50082–1#: 1998 nn
BSEN 50082–2#: 1995 nn
BSEN 61800–3 : 1996 nn
BSEN 61000–3–2: 1995 nn
# compliant with these immunity standards without specifed EMC Filters and with the protection
requirements of Council Directive 72/23/EEC (amended by 93/68/EEC) article 13 and Annex III
relating to Low Voltage Equipment, by following the guidance found in the relevant clauses of the
following standard:
–
Standard Title
EN50178: 1997 Electronic equipment for use in power installations
Machinery Directive
The above Electronic Products are components to be incorporated into machinery and may not be
operated alone. The complete machinery or installation using this equipment may only be put in to
service when the safety considerations of the Directive 89/392/EEC are fully adhered to. Particular
reference should be made to EN60204–1 (Safety of Machinery – Electrical Equipment of
Machines). All instructions, warnings and safety information of the Product Installation Manual
must be adhered to.
Signed: .....................................
Dr. Gerry Boast
Engineering Manager