Filter
Top Products
3-6
Cisco ASA 5500-X Series Hardware Installation Guide
Chapter 3 Installing and Connecting the ASA 5500-X
Rack Mounting the Chassis
Prerequisites
Verify the Box Contents
Verify the Rack Type
The slide rails are pre-assembled for square hole racks. Additional steps are required for round hole
racks and threaded hole racks. The following figure shows the slide rail with square hole rack inserts.
Tools Required
• Phillips screwdriver
• Flat-head screwdriver (for threaded hole racks)
A Slide Rails (x2) (preconfigured for square hole
racks)
B Phillips flat-head screws for Inner Slide (x2)
C Round Hole Inserts for round hole racks (x4) D Threaded Hole Brackets for threaded hole
racks (x2)
E Threaded Hole Standoffs for threaded hole
racks (x2)
F Phillips pan-head screws for threaded hole
racks (x8)
300885
A
B C D E F
330903