Filter
Top Products
CHAPTER
4-1
Cisco ASA 5500-X Series Hardware Installation Guide
4
Maintenance and Upgrade Procedures for the
ASA 5500-X
This chapter includes the following sections:
• Removing and Replacing the Chassis Cover, page 4-1
• Installing an I/O Card, page 4-3
• Installing and Removing the SFP Modules, page 4-11
• Removing and Installing the Power Supply, page 4-13
• Installing and Removing the Solid State Drive for the ASA CX SSP, page 4-21
Removing and Replacing the Chassis Cover
This section describes how to remove and replace the chassis cover. This section includes the following
topics:
• Removing the Chassis Cover, page 4-1
• Replacing the Chassis Cover, page 4-2
Removing the Chassis Cover
To remove the chassis cover, perform the following steps.
Prerequisites
Read the Regulatory Compliance and Safety Information for the Cisco ASA 5500-X Series document.
Detailed Steps
Step 1 Power off the chassis.
Warning
Before working on a system that has an On/Off switch, turn OFF the power and unplug the power cord.
Statement 1