Filter
Top Products
4-23
Cisco ASA 5500-X Series Hardware Installation Guide
Chapter 4 Maintenance and Upgrade Procedures for the ASA 5500-X
Installing and Removing the Solid State Drive for the ASA CX SSP
Figure 4-32 shows the ASA 5512/5515/5525-X models. Figure 4-33 shows the ASA 5545/5555-X
models.
Figure 4-32 Installing the SSD in the ASA 5512/5515/5525-X
Figure 4-33 Installing the SSD in the ASA 5545-X and ASA 5555-X
Step 3
On the front panel of the ASA, make sure the HDD1(top SSD) and HDD0 (bottom SSD) indicators are
solid green to indicate that the SSDs are now active.
Step 4 If you replaced the drive in the ASA 5512-X, ASA 5515-X, or ASA 5525-X, you need to reinstall the
ASA CX using the ASA CX boot image. For more information refer to Cisco ASA CX Module Quick
Start Guide found at this URL:
http://www.cisco.com/en/US/docs/security/asa/quick_start/cx/cx_qsg.html
If you replaced the drives in the ASA 5545-X and ASA 5555-X, the ASA rebuilds the data on the SSD
because it is configured to be in RAID1.
334634
334565