Filter
Top Products
4-9
Cisco ASA 5500-X Series Hardware Installation Guide
Chapter 4 Maintenance and Upgrade Procedures for the ASA 5500-X
Installing an I/O Card
Step 8 Lift the I/O card out of the chassis with both hands by placing an index finger into each of the card cover
vents and placing a thumb on the edge of the card cover. (See Figure 4-11.) Use firm upward pressure
and a gentle rocking motion, as the card is firmly seated.
Figure 4-11 Lift the I/O Card Upward to Release it
Step 9
Insert the new I/O card into the chassis. (See Figure 4-12.)
The I/O card holder fits properly if the following criteria are met:
a. The PCIe bus is properly inserted on the motherboard.
b. The small black plastic guide slides all the way into the chassis.
c. The two hooks on the assembly plug into the two slots on the edge of the chassis.
1 Index finger placement
2 Thumb placement
331354
1 2
21