Filter
Top Products
Section 2 INSTALLATION & CONNECTION
Section 2
Multi-Controller
2-5
ZS-MDC
User’s Manual
■ Installing on the DIN track
The following describes how to attach the 35 mm wide DIN track by quick, easy opera-
tion.
● Installation procedure
The following describes how to install the Multi-Controller and Sensor Controller on the
DIN track.
1. Hook the connector end of the Sensor
Controller onto the DIN track.
2. Push the Multi-Controller down onto the
DIN track until the hook on the I/O cable
side is locked.
Push down until you hear it snap into
place.
Always hook the connector end of the Multi-Controller on the DIN track first. Hooking the I/O cable
end on the DIN track first may impair the mounting strength of the DIN track attachment.
DIN track (sold sepa-
rately)
PFP-100N (1 m)
PFP-50N (0.5 m)
PFP-100N2 (1 m)
End plate (sold separately)
PFP-M
Hook on connector
Hook on I/O cable