Filter
Top Products
4-16
Section 4 APPLICATION SETTING EXAMPLES
ZS-MDC
User’s Manual
Section 4
Measuring the Twist of a Workpiece
• To output the judgment result of the operation
[I/O SET]-[I/O SET]-[OUT]
6. Select [TASK3] so that the judgment on the
twist can be output.
• To linear-output the operation result
[I/O SET]-[I/O SET]-[ANALOG]
6. Select [TASK3] so that the twist value can be
linear-output.
The calculation results of each CH can be batch-acquired if you use the communication command.
▲
1TASK1
3TASK3
2TASK2
4TASK4
▲
1TASK1
3TASK3
2TASK2
4TASK4