Filter
Top Products
5-12
Section 5 APPENDIX
ZS-MDC
User’s Manual
Section 5
Version Up Information
Version Up Information
This section describes the revisions made to the software.
■ Ver1.00 to Ver1.50
*Refer to the User’s Manual for the Sensor Controller.
■ Ver1.50 to Ver2.00
*Refer to the Userís Manual for the Sensor Controller.
Description of Change Pages
Task setup function was added. p.3-13
Logic operation can be performed on the information of Sensor Controllers up to nine channels. p.3-14
“K+mX+nY” that enables average height measurement and flexible formulas on types of logic
operations were added.
p.3-15
The zero reset memory function was added. *
The input signal setup function was added. *
The I/O assignment function was added. p.3-16
Description of Change Pages
RS-232C “delimiter”, and “CompoWay/F”, “Non-procedural” and “Node” were added to the
communication specifications.
*
The Data Storage unit (ZS-DSU) was supported. —
SmartMonitor Zero was supported. —