Filter
Top Products
Section 4 APPLICATION SETTING EXAMPLES
Section 4
Measuring the Average Height
4-13
ZS-MDC
User’s Manual
[SENSING]-[CALC]-[CALC]-[AVE]
3. Set input A to input C for calculating the
average to ON, and other inputs to OFF.
• To output the judgment result of the operation
[I/O SET]-[I/O SET]-[OUT]
4. Select [TASK1] so that the judgment on the
average value can be output.
• To linear-output the operation result
[I/O SET]-[I/O SET]-[ANALOG]
4. Select [TASK1] so that the average value can
be linear-output.
The calculation results of each CH can be batch-acquired if you use the communication command.
▲
1INPUT A
3INPUT C
2INPUT B
▲
1TASK1
3TASK3
2TASK2
4TASK4
▲
1TASK1
3TASK3
2TASK2
4TASK4