Filter
Top Products
Section 4 APPLICATION SETTING EXAMPLES
Section 4
Measuring the Warp of a Workpiece
4-19
ZS-MDC
User’s Manual
• To output the judgment result of the operation
[I/O SET]-[I/O SET]-[OUT]
5. Select [TASK2] so that the judgment on the
warp can be output.
• To linear-output the operation result
[I/O SET]-[I/O SET]-[ANALOG]
5. Select [TASK2] so that the warp value can be
linear-output.
The calculation results of each CH can be batch-acquired if you use the communication command.
▲
1TASK1
3TASK3
2TASK2
4TASK4
▲
1TASK1
3TASK3
2TASK2
4TASK4