Filter
Top Products
Section 2 INSTALLATION & CONNECTION
Section 2
Multi-Controller
2-9
ZS-MDC
User’s Manual
4. Install the long Mount Adapters on the
two holes on the small Mount Adapter.
Install the long Mount Adapters only on both
sides of gang-mounted controllers.
5. Install the Multi-Controller and Sensor
Controller with Panel Mount Adapters
attached onto the panel from the front.
Take care not to pinch the I/O cable.
6. Hook the hooks of the mounting fixture
onto the two holes of the small Mount
Adapters and tighten the screws.
Attach two mounting fixtures each on all gang-
mounted Multi-Controllers and Sensor
Controllers.
7. Make sure that the Multi-Controller and
Sensor Controllers are firmly fixed on
the panel.
H
LD ON
ZER
O
ENABLE
P
L
H
LD ON
ZER
O ENABLE
P
L
H
LD ON
ZERO
ENABLE
P
L
H
LD ON
ZERO ENABLE
P
L
H
LD ON
ZERO
ENABLE
P
L
H
LD ON
ZEROENABLE
P
L
Panel Mount Adapter
Panel Mount Adapter
H
LD ONZERO
ENABLE
P
L
H
LD ONZEROENABLE
P
L
H
LD ONZERO
ENABLE
P
L
H
LD ONZEROENABLE
P
L
H
LD ONZERO
ENABLE
P
L
H
LD ONZEROENABLE
P
L
Panel
Mounting
fixture