Filter
Top Products
200 Chapter3
Instrument Functions: M - O
Marker ->
Instrument Functions: M - O
3.3.7 Mkr->Ref Lvl
Sets the reference level to the amplitude value of the active marker, moving the marked
point to the reference level (top line of the graticule).
Key Path:
Marker ->
NOTE The reference level range is limited by the input attenuator setting, the
maximum mixer level, the preamp setting, etc.
Remote Command:
:CALCulate:MARKer[1]|2|3|4[:SET]:RLEVel
Example: CALC:MARK2:RLEV sets the reference level of the analyzer to the amplitude
of marker 2.