Filter
Top Products
Chapter 5 327
One-Button Measurement Functions
MEASURE (Spectrum Analysis Mode)
One-Button Measurement Functions
n=7 Returns 12 pass/fail test results (0 = passed, or
1 = failed) determined by testing the absolute power in
each offset against the specified offset’s absolute power
limits:
1. Reserved for the future use, returns –999.0
2. Reserved for the future use, returns –999.0
3. Negative offset frequency (A)
4. Positive offset frequency (A)
…
11.Negative offset frequency (E)
12.Positive offset frequency (E).
n=8 Returns 12 scalar values of the pass/fail (0 = passed, or
1 = failed) results determined by testing the relative
power in each offset against the specified offset’s
relative power limits:
1. Reserved for the future use, returns –999.0
2. Reserved for the future use, returns –999.0
3. Negative offset frequency (A)
4. Positive offset frequency (A)
…
11.Negative offset frequency (E)
12.Positive offset frequency (E).
n=9 Returns 12 scalar values of frequency (in Hz) that have
peak power in each offset:
1. Reserved for the future use, returns –999.0
2. Reserved for the future use, returns –999.0
3. Negative offset frequency (A)
4. Positive offset frequency (A)
…
11.Negative offset frequency (E)
12.Positive offset frequency (E).
n=10 Returns 12 scalar values (in dBm) of the absolute peak
power of the segment frequencies:
1. Reserved for the future use, returns –999.0
2. Reserved for the future use, returns –999.0
3. Negative offset frequency (A)
4. Positive offset frequency (A)
…
11.Negative offset frequency (E)
12.Positive offset frequency (E).
Measurement Results Available (Continued)
Command /
Condition
n Results Returned