Filter
Top Products
OPERATION
B-2 B-2
DC-600
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
SAFETY PRECAUTIONS
Read this entire section of operating instructions
before operating the machine.
ELECTRIC SHOCK can kill.
• Do not touch electrically live parts or
electrodes with your skin or wet
clothing.
• Insulate yourself from the work and
ground.
• Always wear dry insulating gloves.
• Do not use AC welder if your cloth-
ing, gloves or work area is damp or if
working on, under or inside work-
piece.
Use the following equipment:
-Semiautomatic DC constant voltage
(wire) welder.
-DC manual (stick) welder.
-AC welder with reduced voltage con-
trol.
• Do not operate with panels removed.
• Disconnect input power before ser-
vicing.
-------------------------------------------------------------
READ THIS WARNING, PROTECT YOURSELF &
OTHERS.
FUMES AND GASES can be
dangerous.
• Keep your head out of fumes.
• Use ventilation or exhaust at the arc,
or both,to keep fumes and gases
from your breathing zone and gener-
al area.
WELDING, CUTTING and GOUG-
ING SPARKS can cause fire or
explosion.
• Do not weld near flammable material.
• Do not weld, cut or gouge on contain-
ers which have held flammable mater-
ial.
ARC RAYS can burn.
• Wear eye, ear, and body protection.
Observe additional Safety Guidelines detailed in
the beginning of this manual.
WARNING