Filter
Top Products
GENERATOR FRAME
REMOVAL AND REPLACEMENT (continued)
TROUBLESHOOTING AND REPAIR
F-77 F-77
CLASSIC® 300D & 300G
See Figure F.13 for steps 10 - 13.
10. Cut all necessary cable ties.
11. Disconnect the blue and the brown wires at the in-
line connectors. See Figure F.13 and the Wiring
Diagram.
12. Label the cables that are connected to the selector
switch. Otherwise, you will need to see the Wiring
Diagram during reassembly.
13. With the 1/2" wrench, remove the cables connect-
ed to the selector switch.
FIGURE F.13 – WIRE AND SELECTOR SWITCH CONNECTIONS
IDLER PC BOARD
FINE CURRENT
ADJUSTMENT
RHEOSTAT
SELECTOR
SWITCH
FIELD BRIDGE
IN-LINE CONNECTORS
BLUE/BROWN LEADS
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC