Filter
Top Products
ACCESSORIES
C1.3 C1.3
CLASSIC® 300D & 300G
Wire Feed Module (K623-1) - Provides constant volt-
age (CV) output with improved arc stability for
Innershield welding. Excellent for MIG welding.
Recommended wire feeders are the LN-7, LN-23P and
LN-25. (Factory installed on the K1643-2).
LN-25 Wire Feeder K449-Portable CC/CV unit for
flux-cored and MIG welding. Includes Gas Solenoid &
Internal Contactor. Requires Wire Feed Module.
Remote Voltage Control Kit for LN-25 K444-2
Provides 25 ft. (7.5m) of remote output voltage control
and output jumper (2 and 4) for machines having 14
pin MS-type connector.
Magnum® 350 Innershield Gun (for LN-25)K126-2-
For self-shielded wire with 15 ft. (4.5m) cable. For
.062-3/32” (1.6-2.8mm) wire.
Magnum® 200 MIG Gun (for LN-25
))
K497-
3-With
15 ft. (4.5m) cable. For .025 (0.6m) wire.
Magnum Gun Connector KiT-Connects Magnum 200
MIG gun to LN-25 Wire Feeder.
LN-23P Wire Feeder K316L-1-Portable CV unit for
Innershield pipe welding. Control cable operates con-
tactor inside Wire Feed Module for “cold” electrode.
Requires LN-23P Adapter Kit (K350-1) and Gun and
Cable Assembly.
LN-23P Adapter Kit K350-1-Required to adapt LN-
23P to any Lincoln power source. Makes 14 pin con-
nection at power source.
Magnum® 250 Innershield Gun (for LN-23P) K355-
10-For lighter weight and easier handling. Rated 250
amps, 60% duty cycle. For .068 through 5/64” (1.7
through 2.0 mm) Innershield wire and includes
reduced speed switch. For pipe welding, an M11476
62° gun tube is recommended.
62° gun tube for Pipe Welding KP1909-1-
Recommended modification for K355-X or K345-x
guns with 90° gun tubes. Compatible with K126-1,-
2,K264_8 and K355-10.
SPOOL GUN WELDER
Magnum Spool Gun K487-25-Hand held semiauto-
matic wire feeder requires SG Control Module. 25 ft.
length.
SG Control Module K488-The interface between the
power source and the spool gun. Provides control of
wire speed and gas flow.
Input Cable K691-10.-For Lincoln engine drives with
14-pin MS-type connection, separate 115V NEMA
receptacle and output stud connections. 10 ft.
length.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC