Filter
Top Products
INSTALLATION
A5.2 A5.2
CLASSIC® 300D & 300G
TECHNICAL SPECIFICATIONS – CLASSIC® 300G (K1754-1)
DC CURRENT RANGE
Fine Adjustment in each Range
40-350 Amps
DUTY CYCLE
100%
60%
RATED DC OUTPUT*
VOLTS @ RATED AMPS
30V @ 250A
NEMA Rating
32V @ 300A
(1) 115V will operate either 60 Hz. or 50/60 Hz. power tools, lights etc.
* Based on a 10 min. period.
Make/Model Description Speed (RPM) Displacement Ignition Capacities
cu. in. (Ltrs.) System
High Idle 1800 Delco Voyager Fuel: 15 gal.
4 Cylinder High Energy 57 Ltrs.
GM 4 Cycle
3.0 Liter Water-Cooled Full Load 1800 Distributor Type Oil: 4.5 Qts.
Gasoline Engine 4.3 Ltrs.
Classic® 300G Cast Iron Cylinder 183.0(3.0) Electronic
(K1754-1)
Block/Crankcase Low Idle 1360
53.0 HP @
1800 RPM
INPUT - GASOLINE ENGINE
RATED OUTPUT - WELDER
HEIGHT WIDTH DEPTH WEIGHT
40.94** in. 24.00 in. 66.91in.
1039.9 mm 609.6 mm 1700 mm 1330 lbs. (603kg.)
**Top of enclosure, add 8.0” (203.2mm) for exhaust
OUTPUT - GENERATOR
Auxiliary Power
1
3000 Watts, 60 Hz. AC
(26 Amps @ 115V), (13 Amps @ 230V)
PHYSICAL DIMENSIONS
ENGINE OPERATING LOAD FUEL CONSUMPTION
Cooling 9.9 Qts.
9.4 Ltrs.
DESCRIPTION
300 Amp DC Welder
All Copper Windings
Pure DC Power
Generator
Low Idle (1360 RPM)-No Load
High Idle (1800 RPM)-No Load
AC Auxiliary-115 Volts-26 Amps
50 Amps @ 22 Volts @ 60% Duty Cycle
100 Amps @ 24 Volts @ 60 % Duty Cycle
150 Amps @ 26 Volts @ 60% Duty Cycle
200 Amps @ 28 Volts @ 60 % Duty Cycle
250 Amps @ 30 Volts @ 60 % Duty Cycle
300 Amps @ 32 Volts @ 60 % Duty Cycle
250 Amps @ 30 Volts @ 100 % Duty Cycle
.89 gal/hr (3.37 ltrs/hr)
1.32 gal/hr (5.00 ltrs/hr)
1.42 gal/hr (5.32 ltrs/hr)
1.24 gal/hr (4.70 ltrs/hr)
1.27 gal/hr (4.82 ltrs/hr)
1.33 gal/hr (5.04 ltrs/hr)
1.47 gal/hr (5.57 ltrs/hr)
1.66 gal/hr (6.27 ltrs/hr)
1.83 gal/hr (6.91 ltrs/hr)
2.15 gal/hr (8.12 ltrs/hr)
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC