Filter
Top Products
Install Your Instrument
AWG5000 Series Quick Start User Manual
7
Inspect Your Instrument
Two types of diagnostics are provided to verify the functionality of your instrument:
■ Power-on self test – Every time you power on the instrument, the instrument automatically performs the internal
diagnostics.
■ Diagnostics from the System menu – You can also run the internal diagnostics using the System menu. Use the
following procedures:
1. Select System > Diagnostics... from the
menu bar.
The Diagnostics dialog box appears.
2. Confirm that the Loop box is not
checked.
If Loop is checked, the diagnostics runs
until it is manually stopped.
3. If you click Select All, all diagnostic
items are checked.
You can execute all items together or
you can execute only the selected
item(s).
4. Click Execute to start the diagnostics.
Verify that the instrument passes all
tests. If diagnostic failures occur,
contact your local Tektronix service
personnel.
1
2
3
4