Tektronix AWG5000 Series Welding System User Manual


 
Using the View Menu
AWG5000 Series Quick Start User Manual
59
Using Display Properties Dialog Box
You can configure the appearance of waveform edit and sequence edit windows of your arbitrary waveform generator.
1. Select View > Display Properties... to
display the Display Properties dialog
box.
Click the Waveform Window tab.
2. You can select the Waveform window
display format (Graphic or Table).
3. When Overlay is specified, analog data
from multiple channels can be
displayed overlaid.
4. When Graphic is specified, you can
turn the Grid On and Off.
5. When Table is specified, you can select
the table display format from the
following:
Binary
Hex
Voltage
Normalized Value
6. You can select displayed items for each
channel in the Waveform window.
7. You can select the vertical units.
8. You can select the horizontal units.
The vertical and horizontal units set-
tings are common to all channels.
8
7
1
3
6
2
4
5