Filter
Top Products
Using the Settings Menu
AWG5000 Series Quick Start User Manual
63
Channel Coupling
You can change the parameter values for multiple channels at a time. This function is called Channel Coupling.
Quick Tips
■ Ch 1 –>Ch 2, Ch 3, Ch 4 means that Ch 1 parameters are coupled with Ch 2, Ch 3 and Ch 4 parameters. With the
Channel Coupling in the On state, the Ch 1 parameters are applied to the instrument hardware settings of the other
three channels. You cannot select parameters for channel coupling in the Channel page of the Settings window. The
disabled parameters are grayed out.
■ The following parameters are excluded from channel coupling:
■ Channel skew
■ Output waveform
■ Sequence waveform
■ External signal add function
■ Waveform Rotation
■ Marker Delay
■ Parameters that are not related to the output signal, such as marker display on/off
1. Select Settings > Coupling... to open
the Coupling dialog box.
You can also open this dialog box from
the pop-up menu displayed by
right-clicking on the Channel page of
the Settings window.
2. Select a coupling method.
Ch 1 –> Ch 2 and Ch 3 –> Ch 4 means
that Ch 1 and Ch 2, and Ch 3 and Ch 4
are coupled, respectively.
3. Select Ch 1 –>Ch 2, Ch 3, Ch 4 to
couple the Ch 1 parameters with Ch 2,
Ch 3, and Ch 4 parameters.
1
2
3