Filter
Top Products
Using the Edit Menu
48 AWG5000 Series Quick Start User Manual
Editing a Sequence
The following commands are provided for sequence edit:
Clear. Clear removes the contents of selected element(s). Unselected elements do not shift. You can clear multiple
non-contiguous elements.
Copy, Paste-Insert and Paste-Replace. You can copy or paste data on one or more contiguous elements. The data
in the clipboard will be inserted or replaced at the specified position of the sequence. If Paste-Insert is executed, the exist-
ing data is shifted.
Cut Example (Sequence Window)
You can do a Cut or Delete on one or more contiguous elements.
Quick Tip
■ For more information on the edit commands for sequence, refer to the online help.
1. Select the element(s) to cut. In this
example, Index number 2 is the target of
Cut.
NOTE. Cut and Delete can be done by the units
of element.
2. Select Cut from the Edit menu or the
pop-up menu.
3. Cut is executed and the remaining data
in the sequence are shifted.
NOTE. Cut data is placed in the clipboard.
Deleted data is removed from the sequence
and cannot be recovered.
1
2
3