Tektronix AWG5000 Series Welding System User Manual


 
Control Panel
AWG5000 Series Quick Start User Manual
15
To Lock/Unlock the Front Panel Controls
The front panel may be locked by a remote user while the arbitrary waveform generator is being remotely controlled via
GPIB or Ethernet. When the front panel is locked, all keys and buttons are disabled except the power switch. You cannot
use your mouse or keyboard. However, the Windows operations are available even if the instrument front panel is locked.
To unlock the front-panel controls, use a remote command or push the front-panel Cancel button twice. If you exit the appli-
cation, the lock state is cleared. When you restart the application, the front-panel controls are unlocked.
Touch Screen Interface
The arbitrary waveform generator offers two methods of making menu selections:
Front-panel controls, keyboard, and mouse (keyboard and mouse are standard accessories)
Front-panel controls and touch screen interface
1. You can enable or disable the touch
screen interface by pushing the
front-panel Touch Screen button.
To disable the touch screen, push the
front-panel Touch Screen button. When
the touch screen is in the Off state, the
LED is lighted. You can still access the
on-screen menus with a mouse or key-
board.
NOTE. You need to adjust the touch screen when one of the following occurs:
The operating system is restored
The hard disk drive is exchanged
The touch screen is not responding correctly
Run the touch screen program from the shortcut on the Windows desktop to adjust the touch screen.
1