Filter
Top Products
Using the File Menu
AWG5000 Series Quick Start User Manual
37
4. Select a file to import.
5. Select an import action in the Operation
frame.
■ Set to
Select the channel and index num-
ber. The imported waveform data will
be assigned to the specified position.
■ Insert before
The imported waveform data will be
inserted before the specified cell of
the sequence. When the run mode is
non-sequence, this parameter is dis-
abled.
■ Create only
The imported waveform will be
added to the Waveform List window.
■ Overwrite
Specified existing waveform data is
overwritten.
6. If the imported waveform data contains
information on sampling rate, amplitude,
or offset, you can select the attribute for
the waveform using the Change H/W
Setup.
For example, if you check the Sampling
Rate check box, the sampling rate will be
modified to reproduce the same signal
as the imported data.
7. Click Open.
When the import file format is *.AWG,
*.DTG, or *.TXT, a corresponding dialog
box is displayed.
When the import file format is other than
*.AWG, *.DTG, or *.TXT, the selected
file is imported and the waveform
name(s) are listed in the Waveform List
window.
7
6
5
4