Filter
Top Products
Using the Edit Menu
AWG5000 Series Quick Start User Manual
53
Horizontal Shift/Rotate.
You can shift or rotate the specified range of waveform data horizontally using Shift/Rotate
from the Edit menu.
Quick Tips
■ Horizontal Rotate is used to check if the waveform data is connected smoothly from the end of the first waveform to
the beginning of the second waveform. This is especially useful when the waveform is looped by the sequencer.
■ Horizontal Shift/Rotate is applied for analog data and marker.
Set High/Low. You can set the specified range of marker data to high or low using Set High/Low from the Edit menu.
1. Select Mode (Shift or Rotate).
2. Enter the value for the Shift or Rotate
range.
3. Linear or Quadratic interpolation can be
selected for fractional shift or rotation.
4. For item and range, refer to page 44.
1. Select High or Low.
2. For item and range, refer to page 44.
1
4
3
2
1
2