Filter
Top Products
Tu torials
AWG5000 Series Quick Start User Manual
73
Editing a Sequence
1. Recall the default setup.
2. Select Sequence from the Run Mode
page of the Settings window.
3. Select *Sine960 from the Predefined
page of the Waveform List window, and
set the waveform to the first cell of Ch 1
sequence.
Refer to page 24 to learn how to assign
an existing waveform to a cell in the
sequence.
4. Select *Triangle960 from the
Predefined page of the Waveform List
window, and set the waveform to the
second cell of Ch 1 sequence.
5. Create a sine waveform with the
following attributes and set the wave-
form to the third cell of Ch 1 sequence.
■ Waveform Length: 960 points
■ Cycles: 5
■ Amplitude: 1.0 V
p-p
■ Offset: 0.0 V
■ Waveform Name: Sine-1
6. Select the first element in the Sequence
window. The selected cell is high-
lighted.
1
2
3
4
5
6