Filter
Top Products
Using the System Menu
66 AWG5000 Series Quick Start User Manual
Using the System Menu
The System menu provides access to the instrument system configuration such as signal generation control, instrument
calibration, and instrument diagnostics. You can also set the user preferences such as power-on settings or LCD brightness
using the System menu.
Quick Tip
■ Selecting Run from the System menu causes the same effect as pushing the front-panel Run button or the Status Bar
Run button.
Channel Skew Adjustment
The channel skew adjusts the skew (delay) of each channel output.
1. Select System > Run or Stop to control
the signal generation start and stop.
See page 17 for Run State.
2. Click one of these commands to open
the corresponding dialog box.
1
2
Select System > Channel Skew... to open the
Channel Skew dialog box.
1. You can adjust the skew for each
channel independently. This adjustment
applies to analog output and marker
output.
2. Adjusting the skew value will update the
dialog box display.
1
2