Filter
Top Products
Using the View Menu
58 AWG5000 Series Quick Start User Manual
Using Go To Dialog Box
This dialog box is used to move to a specified position in the sequence, or to specify an index number to go to.
Quick Tip
■ You can also use the Go To dialog box in the Waveform List window.
1. Select View > Go To... in the Sequence
window to display the Go To dialog box.
Select the Go To target or enter an
index number in the Value field.
You cannot specify the Go To target
using a parameter of time.
2. Click OK. The display will shift to the
specified position.
3. Select View > Go To... in the Waveform
window to display the Go To dialog box.
Select the Go To target or enter Points
or Time value in the Value field.
4. Click OK. The display will shift to the
specified position.
1
2
3
4