Filter
Top Products
Control Panel
16 AWG5000 Series Quick Start User Manual
Changing Control Settings
As you configure the instrument, you may need to set a numerical parameter such as an amplitude level or offset. To set
these parameters in a screen window, touch or click the parameter to select it. Once the parameter is selected, the general
purpose knob is assigned to the parameter.
You can use the general purpose knob to change parameters, although the following methods are generally available.
Quick Tip
■ The pop-up keyboard and keypad are also called soft keyboard and soft keypad, respectively.
1. Some parameters have increase/
decrease buttons. These buttons are also
called spin buttons. Touch or click the
spin buttons to change to the next avail-
able value.
To move the underbar to a field that
contains an editable number, use the digit
select arrow keys (see page 14).
2. Some parameters supply a pop-up
keypad or keyboard that you can use to
enter a new value.
Touch or click the keypad (or keyboard)
icon to display the keypad (or keyboard).
1
2