Filter
Top Products
Interface and Display
AWG5000 Series Quick Start User Manual
25
Waveform Window
A selected element in the Sequence window or a selected waveform on the Ch n page of the Settings window is displayed
in the Waveform window.
Quick Tips
■ You can change the display format of the Sequence window or the Waveform window using the View menu > Display
Properties dialog box. You can also access the Display Properties dialog box by right-clicking on the window.
■ You can select displayed items in the Waveform window from analog data only, marker data only, or analog and marker
data.
■ To remove waveform data from the Waveform window, select Edit > Clear from the menu bar.
■ You can select the vertical and horizontal units from the following using the Display Properties dialog box.
■ Vertical units – Voltage or Normalized Value
■ Horizontal units – Points or Time
1. This is an example of Graphic display
format. Analog data and markers for
Ch1 and Ch 2 are displayed.
2. You can edit the waveform data
between two cursors.
3. This is an example of Table display
format.
1
2
3