Filter
Top Products
Using the Settings Menu
62 AWG5000 Series Quick Start User Manual
Using the Settings Menu
Use the Settings menu to control the display items on the Settings window.
Quick Tips
■ The Waveform Rotation can be set independently for each channel.
■ Analog Phase – Can be set by degree (°).
■ Analog Delay – Can be set by time or points.
■ The Waveform Rotation setting does not affect the Waveform window display.
1. Click one of these commands to make
the corresponding page of the Settings
window active.
2. These menu items allow you to select
Analog, Marker, and Digital Ampli-
tude/Offset or High/Low settings.
3. Select setting units for Waveform Rota-
tion. You can use the Channel page of
the Settings window for parameter
input.
4. Opens the Coupling dialog box.
5. If Analog (Marker or Digital) Ampli-
tude/Offset is selected, the parameters
for Amplitude and Offset are displayed
in the Channel page of the Settings
window.
6. If Analog (Marker or Digital) High/Low is
selected, the parameters for Analog
(Marker or Digital) High and Analog
(Marker or Digital) Low are displayed in
the Channel page of the Settings
window.
1
2
3
4
5
6