Filter
Top Products
Appendix A: Options
VITS100 NTSC VITS Inserter Instruction Manual
A–5
VITS Inserter
Program In Program Out Monitor Out
VITS Inserter
Program In
Program Out
VM700A
Option 1
To plant
PAL-M Signal
with NTSC VITS
PAL-M Signal with
NTSC VITS and inserted
NTSC Sync and Burst
PAL-M Signal
with NTSC VITS
PAL-M Source
PAL-M Signal with
inserted NTSC VITS
Program
line
51
96
REMOTE
Short pins 1 and 6 together to lock
VITS 100 into BYPASS mode.
Short pins 5 and 9 together to
insert NTSC Sync and Burst.
Figure A–4: Video Measurement Set application for Option 1M
Option 1M VITS signals are the same as those available with the standard
VITS100 NTSC VITS Inserter. Table A–3 lists the factory configuration
(through DIP switches S1–S4) of the VITS100 NTSC VITS Inserter, Op-
tion 1M.
Table A–3: Option 1M Factory Programmed VITS Insertions
Line Field Signal
17 1 NTC7 Composite signal
17 2 NTC7 Combination signal
18 1 and 2 Pass*
19 1 VIRS
19 2 VIRS
20 1 and 2 Pass*
* Passed lines are not deleted or inserted by the VITS 100 NTSC VITS Inserter
Option 1M Signals