Filter
Top Products
*5.AN@.2C29BAJ&.D2.AB?2@
l A “bevel cut” is a cross-cut made with the blade
perpendicular to the fence and with the table set at
0° miter. The blade can be tilted to any angle
within the saw’s range: the left is 0 to 47° and the
r
ight is 0 to 47°.
l The bevel scale is sized and positioned for easy
reading – see Figure 48.
Saw Operations
2C29BA@
64B?22C29&0.92;3<?:.A6<;
“33.9” positions are for cutting 38° “spring angle”
crown molding flat on table
Note: Saw has a 33.9 detent feature to automatically
hold it at this bevel angle setting
“30” positions are for
cutting 45° “spring angle”
crown molding flat on table
Watch While Tilting to Right
BEVEL SCALE INFORMATION
Watch While Tilting to Left
BM 2610007877 04-10:BM 2610007877 04-10.qxp 4/26/10 8:13 AM Page 39