Emerson Process Management GmbH & Co. OHGA-18
X-STREAM XEFD
Instruction Manual
HASXEDE-IM-EX
03/2012
A.3 CSA Certicate of Compliance
Certificate:
1714037 (LR 105173)
Master Contract:
185562
Project:
2507282
Date Issued:
March 14, 2012
DQD 507 Rev. 2009-09-01 Page: 7
CAN/CSA-E60079-0:02 (R2006) - Electric Apparatus for Explosive Gas Atmospheres, Part 0: General
Requirements
CAN/CSA-E60079-1:02 (R2006) - Electric Apparatus for Explosive Gas Atmospheres, Part 1: Construction and
Verification Test of Flameproof Enclosures of Electrical Apparatus “d”
CAN/CSA-E60079-15:02 (R2006) - Electric Apparatus for Explosive Gas Atmospheres, Part 15: Type of
protection "n"
CSA C22.2 No 213-M1987 - Non-Incendive Electrical Equipment for Use in Class I,Division 2 Hazardous
Locations
CAN/CSA-C22.2 No. 94-M91 (R2006) - Special Purpose Enclosures
CAN/CSA C22.2 No. 60529:05 - Degrees of protection provided by enclosure (IP Code)
ANSI/ISA-12.00.01-2002 (IEC 60079-0 Mod) - Electric Apparatus for Use in Class I, Zones 0, 1 & 2
Hazardous (Classified) Locations: General Requirements
ANSI/ISA-12.22.01-2002 (IEC 60079-1 Mod) - Electric Apparatus for Use in Class I, Zones 1 Hazardous
(Classified) Locations Type of Protection – Flameproof “d”
UL 60079-15:2009 - Electric Apparatus for Explosive Gas Atmospheres, Part 15: Construction, Test and
Marking of Type of Protection ’n’ Electrical Apparatus
IEC 60529 Edition 2.1-2001-02 - Degrees of protection provided by enclosure (IP Code)
UL 50 11th Edition - Enclosures for Electrical Equipment
ANSI/ISA 12.12.01-2011 - Non-Incendive Electrical Equipment for Use in Class I and II, Division 2 and Class
III, Divisions 1 and 2 Hazardous (Classified) Locations