Emerson HASXEDE-IM-EX Welding Consumables User Manual


 
Emerson Process Management GmbH & Co. OHGS-14
X-STREAM XEFD
Instruction Manual
HASXEDE-IM-EX
03/2012
General Operating Notes
GENERAL OPERATING NOTES
The unit must be installed in a clean and dry area, protected from strong vibrations and frost
.
The unit must not be exposed to direct sunlight and sources of heat. Admissible ambient
temperatures (see technical details) must be adhered to.
Gas inlets and outlets must not be interchanged.All gases must be conditioned, before sup-
plied to the unit. When using this unit with corrosive sample gases, ensure that these gases
do not contain components harmful to the gas lines.
Admissable pressure for all applied gases is 1500 hPa (consider special conditions for safe
use)!.
Exhaust lines must be laid inclined downwards, depressurized, protected from frost and
according to applicable regulations.
If it is necessary to disconnect the gas lines, the unit’s gas connectors must be sealed with
PVC caps to avoid polluting the internal gas lines with condensate, dust, etc.
To ensure electromagnetic compatibility (EMC), only shielded cables (supplied by us on re-
quest, or of equivalent standard) may be used. The customer must ensure that the shielding
is correctly tted. Shielding must be electrically connected.
HAZARD TO LIFE AND EXPLOSION HAZARD BY EXHAUST GASES
Exhaust gases may contain hydrocarbons and other toxic gases such as
carbon monoxide.
Faulty gas connections may lead to explosion and death.
Ensure that all gas connections are connected as labelled and airtight.