Filter
Top Products
Emerson Process Management GmbH & Co. OHG1-4
X-STREAM XEFD
Instruction Manual
HASXEDE-IM-EX
03/2012
1.5 Compliances
1.5 Explosion Protection Compliances
These products are available in two different
variations, separately certied by agencies
for the use in hazardous (classied) areas:
The one variation, to be equipped with cable
glands, is certied by Fyzikálně technický
zkušební ústav, s.p (FTZÚ), an European
Notied Body under the Directive 94/9/EC
(„ATEX“) and conforms to the provisions of
EN 60079-0 and EN 60079-1. See appen-
dix for a copy of the EC type examination
certicate.
The second variation, to be equipped with
metric-to-NPT adapters and conduits (these
components are not part of the instrument
certication), is certied by the Canadian
Standards Association, an „OSHA Nationally
Recognized Testing Laboratory“ (NRTL), for
Canada and USA and conforms to the pro-
visions of CAN/CSA-E60079-0:02 (R2006),
CAN/CSA-E60079-1:02 (R2006), ANSI/
ISA-12.00.01-2002 (IEC 60079-0 Mod), ANSI/
ISA-12.22.01-2002 (IEC 60079-1 Mod). Fur-
thermore, these X-STREAM X2FD analyzers
are certied for use in Class I, Division 2,
Group BCD T3 areas.
See appendix for a copy of the CSA Certicate
of Compliance.
IECEx certication enables worldwide appro-
vals with minimized need of testing.
The following certication markings apply to
the products:
European Union (EU, ATEX)
Category 2, Zone 1:
Ex d IIB+H
2
T4 Gb
EC ATEX Type Examination Certicate:
FTZU 08 ATEX 0028 X.
IECEx
Ex d IIB+H
2
T4 Gb
Conforms to the provisions of the „Equipment
intended for use in Potentially Explosive At-
mospheres (ATEX)“ Directive 94/9/EC, EMC
Directive 2004/108/EC and CE Directive
93/68/EEC.
USA
Class I, Zone 1, AEx d IIB+H
2
T3
Class I, Division 2, Group BCD T3
Canada
Class I, Zone 1, Ex d IIB+H
2
T3
Certicate of Compliance 1714037X