Filter
Top Products
The HBAnyware Utility User Manual Page 7
3. Run the install script. Type:
./wsinstall
4. When prompted, enter the Web server's document root directory. For example:
/srv/www/htdocs
5. You are provided with the IP address of the host and asked if that is the IP address that is being
used by your Web server. Answer Y or N as appropriate. If you answer N, you are prompted for
the IP address you wish to use.
6. You are asked if your Web server is listening on the normal default HTTP port (80)? Answer Y or
N as appropriate. If you answer N, you are prompted for the port you wish to use.
You are notified when the installation of the HBAnyware Web Launch package is complete.
Once the necessary information is entered, you are notified when the installation of the HBAny-
ware Web Launch package is complete. The Web Launch configuration files are created and
Web Launch Services automatically starts.
7. To verify installation, locate another client, open a Web browser window and enter this URL
according to this format:
http://IP_ADDR:PORT_NUM/hbanyware.jnlp
where IP_ADDR is the IP address of host on which you installed the HBAnyware Web Launch
service, and PORT_NUM is the TCP port number of the listening hosts' Web server. The stan-
dard HBAnyware user interface is displayed.
Installing the HBAnyware Utility Security Configurator
The Emulex driver and the HBAnyware utilities must be installed before you can install the HBAnyware
Security Configurator.
To install the HBAnyware utility Security Configurator:
In Windows:
1. Locate the SSCsetup.exe file. The default path for this file is:
C:\Program Files\HBAnyware
2. Double-click the SSCsetup.exe file. A welcome window appears.
3. Click Next. The Setup Status window is displayed. After setup completes, the Emulex
HBAnyware Security Setup Completed window appears.
4. Click Finish.
In Solaris LPFC and Solaris emlxs (SFS):
1. Copy the <HBAnywareSSC_version>.tar.gz file to a directory on the install machine.
2. cd to the directory to which you copied the .gz file.
3. Untar the file. Type:
gzcat <HBAnywareSSC_version>.tar.gz | tar xvf-
4. Log on as ‘root’.
5. At the shell prompt, type:
pkgadd -d `pwd`
Note: The HBAnyware utility Security Configurator is not supported on the VMWare ESX
Server.